SEBASTIAN PHOTO DARKROOM SINKS,
VENT-HOODS & CASEWORK
LITHOGRAPHY & PRINTMAKING EQUIPMENT
Owned and Distributed by California Stainless Mfg., Inc., Camarillo, CA (888) 712-7035
For more than 60 years Sebastian Darkroom Products have
provided darkroom equipment and casework especially designed
for teaching and learning the art of photography. Sebastian Sinks
and Vent-Hoods are beautifully crafted of non-corrosive polyvinyl
chloride, PVC, are extremely durable and are engineered to work.
|
|  |
A Sebastian PVC ADA walkaround
Print Processing Sink,
Model: SWAS-16851 -F, with
a companion Circular Print
Washer (with temperature
regulation) and Squeegee
Board, Model: SCPWSS-44.
Chemical fumes are safel
carried away throughout the
entire length of the sink
with a Sebastian Vent-Hood,
Model: SWHWA-168.
|
|
A typical Sebastian PVC ADA
Film Processing Wall Sink,
Model: SFPS-9630-F, with four
temperature regulated wash
stations, dual-head eye-wash,
two "spent-fixn dump troughs
and a mixing faucet. Chemical
fumes are safely carried away
the entire length of the sink through a Sebastian Vent-Hood, Model: SVH-lT-96.
Sebastian Sinks and Vent-Hoods
are made by master craftsmen who are skilled in cutting and joining PVC
plates and pipe by fusion welding.
|
 |
A Sebastian PVC ADA walkaround
Print Processing Sink,
Model: SWAS-16851 -F, with
a companion Circular Print
Washer (with temperature
regulation) and Squeegee
Board, Model: SCPWSS-44.
Chemical fumes are safel
carried away throughout the
entire length of the sink
with a Sebastian Vent-Hood,
Model: SWHWA-168.
|
A typical Sebastian PVC ADA
Film Processing Wall Sink,
Model: SFPS-9630-F, with four
temperature regulated wash
stations, dual-head eye-wash,
two "spent-fixn dump troughs
and a mixing faucet. Chemical
fumes are safely carried away
the entire length of the sink through a Sebastian Vent-Hood, Model: SVH-lT-96.
Sebastian Sinks and Vent-Hoods
are made by master craftsmen who are skilled in cutting and joining PVC
plates and pipe by fusion welding.
|
WALK-AROUND SINKS
Catalog Pages: 2-5, 2-10, 2-11, 2-13A, 2-14, 2-15,
2-22, 2-24
WALL SINKS
Catalog Pages: 2-2, 2-3, 2-4, 2-6, 2-7, 2-13, 2-23,
2-27, 2-28
SLOT-VENT SINKS
|
Sebastian PVC Sinks are available with state-of-the-art Slot-Vent
chemical fume removal at tray level through slots in the sink rails
where fumes are drawn down to exhaust ducts below the sink.
Illustrated above is a Sebastian Slot-Vent Sink for making photo
murals, Model: SWASSV-24051-F. A Sebastian Laminar-Flow
Print Washer is built into the sink as shown. On an extremely long
sink like this there is an end splash faucet deck with faucets, dual-
-head eye-wash units and temperature regulators. All sinks are
fitted at the factory with the required faucets and controls.
Sebastian Sinks are factory plumbed and tested to 100 psi. Copper pipe
is sized as required for proper water flow and carefully fitted as illustrated
above. At the job site the plumber has on1 three connections:
1-112" PVC drain, hot and cold water supply lines.
|
|
